Fax Procedure
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
74
Fax Procedure
This section describes the basic procedure for sending faxes. Follow the steps below.
• Loading Documents on page 74
• Select the Features on page 75
• Enter the Fax Number on page 76
• Start the Job on page 76
• Check the Job Status on page 77
• Stop the Fax Job on page 77
• Fax Confirmation on page 77
If an authentication feature is enabled, you may need an account before using the machine. To get an
account, or for more information, contact the System Administrator.
Note: Refer to the System Administrator Guide for information on setting up the Fax feature.
Loading Documents
Documents can be loaded either into the automatic document feeder or onto the document glass.
Automatic Document Feeder
The automatic document feeder can hold a maximum of 50 originals of 20 lb (80 g/m²) thickness.
1. Load documents to be scanned face up in the input tray
of the automatic document feeder with the top of the
document to the left of the tray.
2. Move the document guide to just touch both sides of the
document.