Filter
Top Products
System Setup
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
173
7. Continue customizing the Machine Settings as required, then press Stop to return to Ready
mode.
Paper Setup
After loading paper in the paper tray, set the paper size and type using the control panel. These
settings will apply to Copy and Fax modes.
1. Press Machine Status on the control panel.
2. Press the up/down arrows to highlight System Setup and press OK. If necessary, enter the
Administrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 for
instructions.
3. Press the up/down arrows to highlight Paper Setup and press OK.
The following Paper Setup options and settings are available:
Note: * indicates the factory default setting.
Option Description Settings
Paper Size This is the most common paper size
that will be used in the machine and is
the size the machine will feed if a
specific size is not selected.
•Tray 1
•Tray 2
•Letter *
•Legal
•Oficio
•US Folio
•A4
•ISO B5
•JIS B5
•Executive
•A5
•A6
•Custom
•Bypass Tray •Letter *
•Legal
•Oficio
•US Folio
•A4
•ISO B5
•JIS B5
•Executive
•A5
•A6
•Monarch Env
•DL Env
•C5 Env
•C6 Env
• No.10 Env
•Postcard
•Custom