Filter
Top Products
XEROX WIDE FORMAT COPY SYSTEM Special features keys • 59
Special features keys
Special features keys
There are many enhanced features for making copies that meet special
needs. The keys that control these features are on the right side of the
Scan System Control Panel.
To enable a feature, press the applicable key. If the feature has an
associated screen, that screen is displayed when the key is pressed. If
any settings are changed from the default state, the corresponding
indicator lamp next to the key illuminates. Pressing the C/CA key on the
numeric keypad twice returns all settings for the feature to the default
state and the corresponding indicator lamp is extinguished.
When the settings for a feature are appropriately set, pressing the same
feature key causes the changes to be accepted and the system returns
to the READY state. Pressing a different feature key while editing a
setting is invalid and causes a beep. Pressing a different feature key
while not editing a setting causes the requested feature screen to be
displayed.
If a feature has no associated screen, pressing that feature key switches
the feature on (enabled) or off (disabled). When such a feature is
enabled, the corresponding indicator lamp is illuminated.
If the BEEP function (factory default) is enabled, a beep sound will be
heard when a key is pressed. If an improper key is pressed, a multiple
beep sound will be heard.
The illustration on the following page depicts the special features portion
of the Scan System Control Panel.