Filter
Top Products
72 • Special features keys XEROX WIDE FORMAT COPY SYSTEM
CROSSFOLD OPTIONS
CROSSFOLD: USE PROGRAM
Crossfold Options Screen
The TITLE BLOCK LOCATION feature enables you to specify the
location of the title block for the copy jobs that are about to be run. On
the Scan System, select the Finisher Key > Intelligent Title Block to
get to the following screen. The title block location choices are BOTTOM
RIGHT, BOTTOM LEFT, TOP RIGHT, TOP LEFT. BOTTOM RIGHT is
the factory default setting.
INTELLIGENT TITLE BLOCK OPTION
9
INTELLIGENT TITLE BLOCK
Intelligent Title Block Screen
INTELLIGENT TITLE BLOCK should be used if the title block is not
located in the desired location on the folded copy. This selection will use
information, document size, selected fold program and title block position
input to place the title block in a position based on the information.
Intelligent Title Block is DISABLED by default. It may not be the user’s
desired location. Before making this selection, check the following:
• Auto rotate is selected.
• Document being scanned is oriented correctly for scanning.
• Ensure that the title block position specified is correct.
• For additional help, refer to the Folding Supplement manual.
NOTE: The title block location may also be selected on the READY TO
COPY screen, using the title block location icon. The title block location
is indicated by the dotted lines.
TITLE BLOCK
TB LOCATION: UPPER RIGHT
Title Block Location Screen
The OUTPUT BIN feature enables you to specify which finisher output
bin to use for the finished output. The choices are DON’T CARE, BIN X
(where X equals 1 to the actual number of finisher bins), FANFOLD.
TITLE BLOCK
LOCATION
OUTPUT BIN