Filter
Top Products
PCL 5
Guide to Using Page Description Languages 2-3
• The last choice is listed in the 300 dpi raster graphics settings
column. The print quality deteriorates if the image is a
rasterized bitmap, which leaves some white space where the
bits are not formulated.
Keep the following points in mind when preparing your images
and setting print attributes:
• Page protection, orientation, and memory are not values that
affect the image quality.
• Setting the graphics quality to HIGH allows for the best
possible output.
• Setting print quality to printer default allows the printer to
determine the best match for the job.
• The DocuPrint 92C NPS/IPS can produce a single-pixel line.
However, because of the many variables involved, such as
print density settings and line placement on the page, Xerox
cannot guarantee the quality of these single-pixel lines.
Specific questions regarding single-pixel line printing for your
application should be directed to your Xerox service
engineer.
Table 2-1. PCL settings
Setting
300 dpi
vector graphics
600 dpi
vector graphics
300 dpi
raster graphics
Resolution 300 600 300
Page protection OFF OFF OFF
Orientation Portrait Portrait Portrait
Memory222
Option…
Graphics mode
HP-GL/2 HP-GL/2 RASTER
Option…
Graphics quality
HIGH HIGH HIGH
Option…
Halftoning
Photographic images Photographic images Photographic images
Option…
Print quality
Printer default Printer default Printer default