Filter
Top Products
137
Data Ports
Serial Data Port
6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A
DB-9 to DB-25 Connections
To connect the print engine’s RS-232 DB-9 interface to a DB-25 connector, an interface
adapter is required. A generic DB-25 adapter can be used, although the +5 VDC signal source
would not be passed through the adapter. Figure 35 shows the connections required for the
DB-9 to DB-25 interface.
Figure 35 • DB-9 to DB-25 Cable Connections
Modem Connection
When the print engine is connected via its RS-232 interface to Data Communication
Equipment (DCE) such as a modem, use a standard RS-232 (straight-through) interface cable.
Figure 36 shows the connections required for this cable.
Figure 36 • RS-232 Cable Connections
FG
TXD
RXD
RTS
DSR
SG
DTR
RXD
TXD
DTR
SG
DSR
RTS
CTS
+5 VDC
SIGNAL
2
3
4
5
6
7
8
9
1
2
3
4
6
7
9
20
+5 VDC
SIGNAL
5
CTS
DTE
(Printer)
DCE
(Modem, etc.)
RXD (receive data)
TXD (transmit data)
DTR (data terminal ready)
SG (signal ground)
DSR (data set ready)
RTS (request to send)
CTS (clear to send)
+5 VDC signal source
NOTE: Pin 1 is unused and unterminated at the printer.
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9