Filter
Top Products
41
Operations
Load Media
6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A
Figure 14 • Loaded Media
To load media, complete these steps:
1. Load media on the media supply reel of the applicator (refer to the applicator’s user
guide).
2. Open the media door.
3. Press the release button (1) on the pinch roller assembly (2), and allow the assembly to
pivot up.
Caution • While performing any tasks near an open printhead, remove all rings, watches, hanging
necklaces, identification badges, or other metallic objects that could touch the printhead. You are not
required to turn off the printer power when working near an open printhead, but Zebra recommends it as a
precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must
reload them before you resume printing.
Left-Hand Right-Hand
1
2