Filter
Top Products
93
Routine Maintenance
Clean the Printhead and Platen Roller
6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A
Clean the Printhead and Platen Roller
Clean the printhead and platen roller according to the schedule in Table 8 on page 90. Clean
the printhead more often if you see inconsistent print quality, such as voids or light print. Clean
the platen roller if you see media movement problems.
To clean the printhead and platen roller, complete these steps:
1. Turn Off (O) the print engine.
2.
3. Remove the media and ribbon from the print engine.
Caution • Observe proper electrostatic safety precautions when handling any
static-sensitive components such as circuit boards and printheads.
Caution • The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
Open the printhead assembly by unlatching the printhead latch (1) from the
locking pin (
2).
1
2