Filter
Top Products
OPERATION
7
3 • Load ribbon onto the supply spindle “1”
(under print head carriage) and empty core ( with
tape attached) onto the take-up spindle “2”. Make
sure the ribbon comes off the top of the supply
spindle and feeds to the top of the take-up spindle.
4 • Push down on the Print Head Lock Lever until an
audible “click” signals the locked-down position.
5 • Close Cover
Please note that the ribbon automatically
synchronises whenever the print head lock down
occurs.
The card flipper will not operate and an error will
be indicated if you try to flip a card when the cover
is open.
2
1