Filter
Top Products
OPERATION
9
2 • 4 Loading Cards
To help you load, print, and collect cards, the P520 has the following items:
A - CARD FEEDER
This items is used for loading cards.
1 • Open Card Feeder Cover by putting your fingers
on both sides and rotating the cover in a clockwise
direction to the open position.
2 • Install cards into Feeder* as shown.
3 • Close Card Feeder Cover.
DO NOT bend cards or touch print surfaces as this
can reduce print quality. The surface of the cards
must remain clean and dust free. Always store
cards in an enclosed container. Ideally, use cards
as soon as possible. If cards stick together,
carefully shuffle them.
* See Chapter 6, Technical Specifications, for card requirements and capacities.