Filter
Top Products
58 PrintServer II User and Reference Guide
Getting Started
Setting up a ZebraNet Connect IP
5. From the Add Port dialog, select Other, then select the ZebraNet Connect Monitor
as the type of port to add.
6. Click OK.
The Add ZebraNet Connect Port screen appears. There is a list of all PSII devices
discovered on the network.
• The TCP/IP monitor searches only the local subnet.
• The IPX/SPX monitor retrieves all devices found in the NetWare bindery.
7. If the port you want to add is listed in the Ports Available on Local Subnet window,
select the port name. If the port you want to use is not listed, you can:
• Select Cancel and repeat step 5 to rediscover the PSII devices.
•In PSII Connect for IPX/SPX, click Search and enter the PSII’s network
number and hardware address.
•In PSII Connect, click the Locate Non-local Device button and enter the static
TCP/IP address used for the PSII.
8. Click Add.
9. To save the configuration, click OK.
Now you can use PSII Connect. Whenever you print to the Windows printer
configured with PSII Connect, your print job will go directly to the PSII port.
IPX (NetWare)
ZebraNet Connect for IPX/SPX is a utility that allows simple, direct, IPX/SPX
printing from your computer to a printer attached to a ZebraNet
PSII. Print jobs printed
through the ZebraNet Connect utility are sent directly to the PSII and do not require a
NetWare server, resulting in a reduction of network traffic.
If you have printing problems while using the
PSII Connect printing port, you can
check the status of the port or change its settings under the printer Properties window.
• For Windows 95/98, select Port Settings under the Details tab.
• For Windows NT 4.0 or Windows 2000, select Configure Port under the Ports tab.
Note • If PSII Connect is not listed, verify the software has been properly installed.