Filter
Top Products
105
LCD Error Messages
6/29/11 110PAX4/R110PAX4 User Guide 57512L-004
The print engine prints while
the ERROR light flashes.
Caution • An improperly connected printhead data or power cable
can cause this error message. The printhead may be hot enough to
cause severe burns. Allow the printhead to cool.
The printhead temperature is
approaching its lower operating
limit.
Continue printing while the printhead
reaches the correct operating
temperature. If the error remains, the
environment may be too cold for
proper printing. Relocate the
print engine to a warmer area.
The printhead data cable is not
properly connected.
Caution • Turn off (O) the print engine
before performing this procedure.
Failure to do so can damage the
printhead.
1. Turn off (O) the print engine.
2. Disconnect and reconnect the data
cable to the printhead.
3. Ensure that the cable connector is
fully inserted into the printhead
connector.
4. Turn on (I) the print engine.
The printhead has a faulty
thermistor.
Call a service technician.
The print engine stops; the
ERROR light flashes.
Caution • The printhead may be hot enough to cause severe
burns. Allow the printhead to cool.
The printhead is over temperature. Allow the print engine to cool. Printing
automatically resumes when the
printhead elements cool to an
acceptable operating temperature.
Table 9 • LCD Error Messages (Continued)
LCD Display/
Print Engine Condition
Possible Cause Recommended Solution
WARNING
HEAD COLD
WARNING
HEAD TOO HOT