Filter
Top Products
Specifications
Ribbon Specifications
154
57512L-004 Rev. A 110PAX4/R110PAX4 User Guide 6/29/11
Ribbon Specifications
Media Unwind Force Steady State Must be uniform and must not exceed 2 lb. (907 g)
Transient (Start/Stop) Must not exceed 4 lb (1814 g)
Media Rewind Force Applicator take-up pull tension must be uniform
from 1 to 4 lb (454 to 1818 g) and must not vary
more than ±20% during operation.
* PAX4 printers are not recommended for use with fanfold media in applicator mode.
Thickness 4.5 microns
Width (wound coated side out) 1.0 in. to 4.2 in. (25.4 mm to 107 mm)
Maximum length 2955 ft (900 m)
Roll size
Inner core diameter
Maximum roll size
1.0 in. (25.4 mm)
4.0 in. (101.6 mm)