Filter
Top Products
23
Print Engine Setup
Handling the Print Engine
6/29/11 110PAX4/R110PAX4 User Guide 57512L-004
Handling the Print Engine
This section describes how to handle your print engine.
Unpack and Inspect the Print Engine
When you receive the print engine, immediately unpack it and inspect for shipping damage.
• Save all packing materials.
• Check all exterior surfaces for damage.
• Raise the media door, and inspect the media compartment for damage to components.
If you discover shipping damage upon inspection:
• Immediately notify the shipping company and file a damage report.
• Keep all packaging material for shipping company inspection.
• Notify your authorized Zebra reseller
Store the Print Engine
If you are not placing the print engine into immediate operation, repackage it using the original
packing materials. You may store the print engine under the conditions shown in Table 3.
Ship the Print Engine
If you must ship the print engine:
• Turn off (O) the print engine, and disconnect all cables.
• Remove any media, ribbon, or loose objects from the print engine interior.
• Close the printhead.
• Carefully pack the print engine into the original container or a suitable alternate container
to avoid damage during transit. A shipping container can be purchased from Zebra if the
original packaging has been lost or destroyed.
Important • Zebra Technologies is not responsible for any damage incurred during the
shipment of the equipment and will not repair this damage under warranty.
Table 3 • Storage Temperature and Humidity
Temperature Relative Humidity
–40°F to 160°F (–40° to 71°C) 5% to 95% non-condensing