Filter
Top Products
Media and Ribbon Requirements
Print quality not only depends on the XiII-Series printer but also on the
media and ribbon used. Factors such as reflectivity and contrast are impor
-
tant for bar code scanning applications. Factors such as paper abrasion and
temperature requirements are important to maintaining printhead life.
We STRONGLY RECOMMEND the use of Zebra Technologies
Corporation-brand supplies for continuous high-quality printing. A wide
range of paper, polypropylene, polyester, and vinyl stock has been
specifically engineered to enhance the printing capabilities of the Zebra
XiII-Series printer and to ensure against premature printhead wear.
Continuous roll media, fanfold media, or cardstock with optional perfora
-
tions and registration holes may be used. Printhead life may be reduced by
the abrasion of exposed paper fibers when using perforated media.
Ribbons used in the Zebra XiII printer MUST be as wide as or wider than
the media used. Zebra-brand ribbons provide an extremely smooth backing
surface which protects the printhead from abrasion by the media. If the rib-
bon is narrower than the media, areas of the printhead will be unprotected
and will be subject to premature wear.
Since print quality is affected by media and ribbon, printing speeds, and
printer operating modes, it is very important to run tests for your applica-
tions. This is especially true if you’re operating in Peel-Off mode, where
these variables combine with label size, backing content, die-cut depth,
and even humidity to affect printer operation.
Unpacking
Save the carton and all packing materials in case shipping is ever required.
Inspect the printer for possible damage incurred during shipment.
Check all exterior surfaces.
Raise the media access door and inspect the media compartment.
Zebra XiII-Series User’s Guide 3
15
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:34:38 1998
Color profile: Disabled
Composite Default screen