Filter
Top Products
108 Zebra ZXP Series 1 Card Printer User’s Manual P1060728-002
C: CardSense Single-Card Feed Mode
Setting Up the Printer Driver
Card Setup tab allows the user to set the single-card feed mode.
To access the Card Setup tab, select Start > Devices and Printers. Right click on the Zebra
ZXP Card Printer listing, then select Printing preferences > Card Setup.
Step 1. Make the appropriate Single Feed option selection from the Current Status
dropdown menu:
• Card feeder: The printer will attempt to a pull a card from the Card Feeder.
If the Card Feeder is empty, the printer will generate an
OUT OF CARDS
error message.
• Single feeder slot: For each print job, the printer will generate an
INSERT
CARD message. Any cards in the Card Feeder will not be used.
• Auto feed: The printer will attempt to feed cards from Card Feeder first. If
Card Feeder is empty, the printer will generate an
INSERT CARD message.
No
OUT OF CARDS error message will be generated.
Step 2. Click the Apply button, then click the OK button.
Important • You do not have to remove the components of the Single-Card Feed Kit in
order to operate in normal mode (printing cards from the Card Feeder).