Filter
Top Products
C: CardSense Single-Card Feed Mode
P1060728-002 Zebra ZXP Series 1 Card Printer User’s Manual 107
Step 7. Remove the Cleaning Roller from the Cleaning Cartridge, and then remove the
protective wrapper from the Cleaning Roller,
Step 8. Place the Cleaning Roller in the Cartridge, and close the lid.
Step 9. The Cleaning Cartridge is held in place by two clips. While gently squeezing the
clips inward, press the cartridge into place. It will seat with a click.
Step 10. Insert the Ribbon Cartridge with the cleaning roller facing down, so the gears on the
ends of the rollers fit into the appropriate slots.
Step 11. Close the printer lid, and push down until you hear an audible click. If you can not
close the lid, the cleaning cartridge or the ribbon cartridge may be installed wrong.
Step 12. Place the printer power switch in the ON ( | ) position.