Filter
Top Products
Troubleshooting
Miscellaneous Printer Problems
126
79695L-003 Z Series
®
/RZ™ Series User Guide 1/11/11
Miscellaneous Printer Problems
Table 20 identifies miscellaneous problems with the printer, the possible causes, and the
recommended solutions.
Table 20 • Miscellaneous Printer Problems
Problem Possible Cause Recommended Solution
The LCD displays a
language that I
cannot read
The language parameter was
changed through the control
panel or a firmware command.
1. Press SETUP/EXIT to enter configuration
mode.
2. Press MINUS (-).
The printer displays the
LANGUAGE
parameter in the current language. Even if
you cannot recognize the characters
displayed, you can still scroll to another
language.
1. Press SELECT to select the parameter.
2. Press PLUS (+) or MINUS (-) to scroll
through the choices until you find a language
that you can read.
3. Press SETUP/EXIT.
The LCD displays
SAVE CHANGES in the
original language.
4. Press SETUP/EXIT again to exit
configuration mode and save the changes
(if the language does not change, you may
need to scroll to a different save option by
pressing
PLUS (+) or MINUS (-) in the
previous step).
5. Repeat this process, if necessary, until you
reach the desired language.
The LCD is missing
characters or parts of
characters
The LCD may need replacing. Call a service technician.