Filter
Top Products
Configuration
Standard Control Panel Parameters
74
79695L-003 Z Series
®
/RZ™ Series User Guide 1/11/11
Adjust Print Speed
Adjusts the speed for printing a label (given in inches per second). Slower
print speeds typically yield better print quality. Print speed changes take
effect upon exiting Setup mode.
Default Value (ZPL): 2 IPS
Default Value (EPL): 6 IPS
Range:
• 200 dpi: 2 to 10 IPS
• 300 dpi: 2 to 8 IPS
• 600 dpi: 1 to 4 IPS
To change the value shown:
1. Press SELECT to select the parameter.
2. Press PLUS (+) to increase the value.
3. Press MINUS (-) to decrease the value.
4. Press SELECT to accept any changes and deselect the parameter.
Table 11 • Printer Parameters (Page 2 of 25)
Language/Parameter
Action/Explanation