Filter
Top Products
example):
• Starts GateD with Rip1 using gated.conf.rip1 as the configuration file:
/usr/sbin/gated –f /etc/rcZ.d/gated.conf.rip1
The GateD conf file specifies the following configuration commands:
• Implements the passive function so GateD is prevented from rerouting information to a
different interface if insufficient information is received.
interface 10.0.0.42 passive
interface 10.0.1.42 passive
interface 10.0.2.42 passive
.
.
.
interface 10.0.13.42 passive
interface 10.0.14.42 passive
interface 10.0.15.42 passive
• Defines the netmask used in the interface.
define 10.0.0.42 netmask 255.255.255.0;
define 10.0.1.42 netmask 255.255.255.0;
define 10.0.2.42 netmask 255.255.255.0;
.
.
.
define 10.0.13.42 netmask 255.255.255.0;
define 10.0.14.42 netmask 255.255.255.0;
define 10.0.15.42 netmask 255.255.255.0;
• Sets the RIP1 protocol to open.
};
rip1 yes{
• Shuts off sending and receiving packets from all interfaces.
Ethernet Switch Blade User's Guide release 3.2.2j page 103