Filter
Top Products
Version 2.x supports three FRU Inventory Device Commands:
Get FRU Inventory Area Info
Read FRU Data
Write FRU Data
The spare SEEPROM space is allocated as follows:
Spare SEEPROM Space Allocation
Space for Start address End address Size Notes
VPD 0 0x3FF 0x400 (1Kbytes)
FRU 0x400 0x13FF 0x1000 (4kbytes)
Parameters 0x1400 0x17FF 0x400 (1 Kbytes)
Attribute 0x1800 0x37FF 0x2000 (8
Kbytes)
Table C.8: SEEPROM Space
IPMB Override/Local Status - Event Data 3 for the IPMB link
IPMB Override Status Data
Bit(s) Type Notes
7 IPMB B Override State 0=Override state, bus isolated; 1= Local Control state - IPM
Controller determines state of bus
6:4 IPMB B Local Status 0=No Failure. Bus enabled if no override in effect;
1=Unable to drive clock HI; 2=Unable to drive data HI;
3=Unable to drive clock LO; 4= Unable to drive data LO;
5= Clock low time out; 6=under test; 7=Undiagnosed
communications failure
3 IPMB A Override State 0=Override state, bus isolated; 1= Local Control state - IPM
Controller determines state of bus
2:0 IPMB A Local Status 0=No Failure. Bus enabled if no override in effect;
1=Unable to drive clock HI; 2=Unable to drive data HI;
3=Unable to drive clock LO; 4= Unable to drive data LO;
Ethernet Switch Blade User's Guide release 3.2.2j page 354