Filter
Top Products
NOTE: this is the zlc output for a single Ethernet Switch Blade Base Interface in the
default configuration with no line cards installed in the chassis.
Querying Fabric Interface ekey Status
Link Status for a single port
To query a link status for a single port type zre<x> query. For example:
zlc zre13 query
Example Output:
Link Status for a Range of Ports
To query the link status for a range of ports type zre<x>..<x> query. For example:
zlc zre0..51 query
Example Output:
Ethernet Switch Blade User's Guide release 3.2.2j page 168
sh-2.04# zlc zre0..23 query
zre0: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre1: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre2: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre3: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre4: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre5: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre6: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre7: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre8: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre9: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre10: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre11: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre12: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre13: <UP, 100FD, PAUSE ENABLE OFF, OK ON>
zre14: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre15: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre16: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre17: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre18: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre19: <DOWN, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre20: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre21: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
zre22: <UP, 100FD, PAUSE ENABLE OFF, OK ON>
zre23: <UP, 1000FD, PAUSE ENABLE ON, OK ON>
sh-2.04#
[ZX7100-OA3.2.2h]# zlc zre13 query
zre13: <EKEY_DISABLED, AUTO, PAUSE ENABLE, EXT_FLT ON, OK ON>
[ZX7100-OA3.2.2h]#