Filter
Top Products
# This script will likely need modification for your particular
# network setup.
#
# In this example the Egress ports, zre20..23 and zre48..50 are
# not managed by HA since how, or if, these ports are managed
by HA is
# dependent on the external devices they are connected to.
Non-HA
# egress ports can be brought up through conventional means by
adding
# an S-script to /etc/rcZ.d. If the ports are to be managed by
HA, they
# can be added to an existing VLAN(zhp) or a new VLAN(zhp) can
be created
# If a new VLAN(zhp) is to be managed by HA, add a zconfig,
sibling_address,
# and vrrp_virtual_address configuration line and define the
port type as
# appropriate.
#
# The interconnect port is needed in the VLANs connected to the
# RAINlink ports.
#
zconfig zhp0: vlan100 = zre51;
zconfig zhp1: vlan1 = zre0, zre4, zre8, zre12, zre16, zre24,
zre28, zre30, zre32, zre34, zre36, zre38, zre40, zre42, zre51;
zconfig zhp2: vlan2 = zre1, zre5, zre9, zre13, zre17, zre25,
zre29, zre31, zre33, zre35, zre37, zre39, zre41, zre43, zre51;
zconfig zhp3: vlan3 = zre2, zre6, zre10, zre14, zre18, zre26,
zre51;
zconfig zhp4: vlan4 = zre3, zre7, zre11, zre15, zre19, zre27,
zre51;
Ethernet Switch Blade User's Guide release 3.2.2j page 36