Filter
Top Products
Prestige 2602H/HW Series User’s Guide
Chapter 21 Media Bandwidth Management Advanced Setup 265
CHAPTER 21
Media Bandwidth Management
Advanced Setup
This chapter describes the functions and advanced configuration of bandwidth management.
21.1 Bandwidth Management Advanced Setup Overview
Bandwidth management allows you to allocate an interface’s outgoing capacity to specific
types of traffic. It can also help you make sure that the Prestige forwards certain types of
traffic (especially real-time applications) with minimum delay. With the use of real-time
applications such as Voice-over-IP (VoIP) increasing, the requirement for bandwidth
allocation is also increasing.
Bandwidth management addresses questions such as:
• Who gets how much access to specific applications?
• What priority level should you give to each type of traffic?
• Which traffic must have guaranteed delivery?
• How much bandwidth should be allotted to guarantee delivery?
Bandwidth management also allows you to configure the allowed output for an interface to
match what the network can handle. This helps reduce delays and dropped packets at the next
routing device. For example, you can set the WAN interface speed to 1000kbps if the ADSL
connection has an upstream speed of 1000kbps. All configuration screens display
measurements in kbps (kilobits per second), but this User’s Guide also uses Mbps (megabits
per second) for brevity’s sake.
You can use the wizard setup screens to configure basic bandwidth management. Refer to
Section 3.2.4 on page 78 for more information.
21.2 Bandwidth Classes and Filters
Use bandwidth classes and child-classes to allocate specific amounts of bandwidth capacity
(bandwidth budgets). Configure a bandwidth filter to define a bandwidth class (or child-class)
based on a specific application and/or subnet. Use the Class Configuration screen (see
Section 21.9 on page 273) to set up a bandwidth class’s name, bandwidth allotment, and
bandwidth filter. You can configure up to one bandwidth filter per bandwidth class. You can
also configure bandwidth classes without bandwidth filters. However, it is recommended that