Filter
Top Products
Prestige 2602H/HW Series User’s Guide
Chapter 41 IP Policy Routing 417
Figure 253 Example of IP Policy Routing
To force packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64 to be
routed to the Internet via the WAN port of the Prestige, follow the steps as shown next.
1 Create a routing policy set in menu 25.
2 Create a rule for this set in Menu 25.1.1 — IP Routing Policy as shown next.
Figure 254 IP Routing Policy Example
1 Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
2 Create another policy set in menu 25.
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 192.168.1.2
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
Gateway addr = 192.168.1.1
Type of Service= No Change
Precedence = No Change
Packet length= 10
Len Comp= N/A
end= 192.168.1.64
end= N/A
end= N/A
end= 80
Log= No
Press ENTER to Confirm or ESC to Cancel: