Filter
Top Products
ZyWALL 50 Internet Security Gateway
Firmware and Configuration File Maintenance 18-15
Figure 18-16 Menu 24.7.1 as seen using the Console Port
Step 2. After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your
computer. Follow the procedure as shown previously for the HyperTerminal program. The
procedure for other serial communications programs should be similar.
18.4.9 Example Xmodem Firmware Upload Using HyperTerminal
Click Transfer, then Send File to display the following screen.
Figure 18-17 Example Xmodem Upload
After the firmware upload process has completed, the ZyWALL will automatically restart.
Menu 24.7.1 - System Maintenance - Upload System Firmware
To upload System firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
router.
Warning: Proceeding with the upload will erase the current router
firmware.
Do You Wish To Proceed:(Y/N)
Type the firmware file’s
location, or click Browse to
look for it.
Choose the Xmodem protocol.
Then click Send.