Filter
Top Products
ZyWALL 50 Internet Security Gateway
Remote Node Setup 4-5
Table 4-2 Fields in Menu 11.1 (PPPoE Encapsulation Specific)
FIELD DESCRIPTION EXAMPLE
Authen This field sets the authentication protocol used for outgoing
calls.
Options for this field are:
CHAP/PAP - Your ZyWALL will accept either CHAP or PAP
when requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
CHAP/PAP
Telco Option
Allocated Budget The field sets a ceiling for outgoing call time for this remote
node. The default for this field is 0 meaning no budget control.
10
Period(hr) This field is the time period that the budget should be reset. For
example, if we are allowed to call this remote node for a
maximum of 10 minutes every hour, then the Allocated
Budget is (10 minutes) and the Period(hr) is 1 (hour).
1
Schedules You can apply up to four schedule sets here. For more details
please refer to the Call Schedule Setup chapter.
Nailed-Up
Connection
This field specifies if you want to make the connection to this
remote node a nailed-up connection. More details are given
earlier in this section.
Session Options
Idle Timeout
This value specifies the idle time (i.e., the length of time there
is no traffic from the ZyWALL to the remote node) in seconds
that can elapse before the ZyWALL automatically disconnects
the PPPoE connection. This option only applies when the
ZyWALL initiates the call.
100 seconds
(default)
4.1.3 PPTP Encapsulation
If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen. Please see the
Appendices for information on PPTP.