Filter
Top Products
ZyWALL 50 Internet Security Gateway
23-8 VPN/IPSec Setup
Figure 23-7 Menu 27.1.1 — IPSec Setup
Table 23-4 Menu 27.1.1 — IPSec Setup
FIELD DESCRIPTION EXAMPLE
Index This is the VPN rule index number you selected in the previous menu.
1
Name Enter a unique identification name for this VPN rule. The name may be up
to 32 characters long but only 10 characters will be displayed Menu 27.1 -
IPSec Summary.
Active
Press [SPACE BAR] to choose either Yes or No. Choose Yes and press
[ENTER] to activate the VPN tunnel. This field determines whether a VPN
rule is applied before a packet leaves the firewall.
Yes
My IP Addr This is the IP address of your ZyWALL. If this field is left as 0.0.0.0, then
the ZyWALL will use the current ZyWALL WAN IP address (static or
dynamic) in setting up the VPN tunnel. If this IP address changes after
setup, the VPN tunnel will have to be rebuilt.
0.0.0.0
Secure
Gateway IP
A
dd
r
This is the WAN IP address of the IPSec router with which you’re making
the VPN connection. If the peer has a dynamic WAN IP address, set this
field to 0.0.0.0. This ma
y
be useful for telecommuters initiatin
g
a VPN
Real IP
address
Menu 27.1.1 – IPSec Setup
Index= 1
Name= Taiwan
Active= Yes
My IP addr= 0.0.0.0
Secure Gateway IP Addr= 10.12.134.2
Protocol= 0
Local: IP Addr Start= 192.168.1.35 End= 192.168.1.38
Port Start= 0 End=N/A
Remote: IP Addr Start= 172.16.2.40 End= 172.16.2.46
Port Start= 0 End=N/A
Enable Replay Detection = No
Key Management= IKE
Edit IKE Setup= No
Edit Manual Setup= N/A
Press ENTER to Confirm or ESC to Cancel: