Filter
Top Products
ZyWALL 50 Internet Security Gateway
4-2 Remote Node Setup
Figure 4-1 Menu 11.1 — Remote Node Profile for Ethernet Encapsulation
Table 4-1 Fields in Menu 11.1
FIELD DESCRIPTION EXAMPLE
Rem Node Name Enter a descriptive name for the remote node. This field can be
up to eight characters.
LAoffice
Active
Press [SPACE BAR] to select Yes (activate remote node) or No
(deactivate remote node).
Yes
Encapsulation
Ethernet is the default encapsulation. Press [SPACE BAR] if you
wish to change to PPPoE encapsulation.
Ethernet
Service Type
Press [SPACE BAR] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method) or RR-Manager
(RoadRunner Manager authentication method). Choose one of
the RoadRunner methods if your ISP is Time Warner's
RoadRunner; otherwise choose Standard.
Standard
Service Name
This is valid only when you have chosen PPPoE encapsulation. If
you are using PPPoE encapsulation, then type the name of your
PPPoE service here.
poellc
Outgoing
My Login
This field is applicable for PPPoE encapsulation only. Enter the
login name assigned by your ISP when the ZyWALL calls this
remote node. Some ISPs append this field to the Service Name
field above (e.g., jim@poellc) to access the PPPoE server.
jim
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A Edit Filter Sets= No
Outgoing:
My Login= N/A
My Password= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel: