Filter
Top Products
Prestige 2602HW Series User’s Guide
Chapter 20 Introducing the SMT 225
CHAPTER 20
Introducing the SMT
This chapter explains how to access and navigate the System Management Terminal and gives
an overview of its menus.
20.1 Introduction to the SMT
The Prestige’s SMT (System Management Terminal) is a menu-driven interface that you can
access from a terminal emulator through the console port or over a telnet connection. This
chapter shows you how to access the SMT menus via console port, how to navigate the SMT
and how to configure SMT menus.
20.2 Accessing the SMT via the Console Port
Make sure you have the physical connection properly set up as described in the Quick Start
Guide.
When configuring using the console port, you need a computer equipped with
communications software configured to the following parameters:
• VT100 terminal emulation.
• 9600 Baud.
• No parity, 8 data bits, 1 stop bit, flow control set to none.
20.2.1 Initial Screen
When you turn on your Prestige, it performs several internal tests as well as line initialization.
After the tests, the Prestige asks you to press [ENTER] to continue, as shown next.