Filter
Top Products
Prestige 2602HW Series User’s Guide
Chapter 3 Wizard Setup 65
3.2.5 SIP Identities
A SIP account's Uniform Resource Identifier (URI) identifies the SIP account in a way similar
to the way an e-mail address identifies an e-mail account. It is also known as a SIP identity or
address. The format of a SIP identity is SIP-Number@SIP-Service-Domain.
3.2.5.1 SIP Number
A SIP number is the part of the SIP URI that comes before the "@" symbol. For example, if
1122334455@VoIP-provider.com was your SIP URI, “1122334455” would be your SIP
number.
3.2.5.2 SIP Service Domain
A SIP service domain is the domain name that comes after the @ symbol in a SIP URI. For
example, if 1122334455@VoIP-provider.com was your SIP URI, “VoIP-provider.com” is the
SIP service domain.
3.2.6 Internet Access Wizard Setup: Third Screen
Use this screen to configure the voice settings (for the Prestige’s SIP account one) with the
information in the Voice Account Information table.
Table 8 Internet Connection with PPPoA
LABEL DESCRIPTION
User Name Enter the login name that your ISP gives you.
Password Enter the password associated with the user name above.
IP Address This option is available if you select Routing in the Mode field.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Click Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise click Static IP Address and type your ISP assigned IP address in the IP
Address text box below.
Connection Select Connect on Demand when you don't want the connection up all the time and
specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default setting
selects Connection on Demand with 0 as the idle time-out, which means the Internet
session will not timeout.
Select Nailed-Up Connection when you want your connection up all the time. The
Prestige will try to bring up the connection automatically if it is disconnected.
The schedule rule(s) in SMT menu 26 has priority over your Connection settings.
Network
Address
Translation
This option is available if you select Routing in the Mode field.
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the
Network Address Translation (NAT) Screens chapter for more details.
Back Click Back to go back to the first wizard screen.
Next Click Next to continue to the next wizard screen.