29-18
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 29 Configuring Multicast Routing
Additional References
Step 10 In the main ASDM window, choose Configuration > Device Setup > Routing > Multicast > IGMP >
Join Group.
The Join Group pane appears.
Step 11 Click Add or Edit.
The Add IGMP Join Group dialog box allows you to configure an interface to be a member of a multicast
group. The Edit IGMP Join Group dialog box allows you to change existing membership information.
Step 12 In the Interface Name field, choose the interface name from the drop-down list. If you are editing an
existing entry, you cannot change this value.
Step 13 In the Multicast Group Address field, enter the address of a multicast group to which the interface
belongs. Valid group addresses range from 224.0.0.0 to 239.255.255.255.
Step 14 Click OK.
Additional References
For additional information related to routing, see the following sections:
• Related Documents, page 29-19
• RFCs, page 29-19
