A SERVICE OF

logo

Open as PDF
next previous
Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Disables per-port flow
control on ports A5 and A6.
Figure 10-13. Example Continued from Figure 10-12
Disables per-port flow
control on ports A1 through
A4 . Flow control is now
disabled on the switch.
Ports formerly configured for
flow control.
Figure 10-14. Example Continued from Figure 10-13
Configuring a Broadcast Limit on the Switch
Broadcast-Limit on switches covered in this guide is configured on a per-port
basis. You must be at the port context level for this command to work, for
example:
ProCurve(config)#int B1
ProCurve(int B1)# broadcast-limit 1
10-20