char Type of characters. Options:
N Numeric A Alphanumeric
B Binary K Kanji
NOTE: In binary mode, the number of characters must be
represented by the 4-digit number in decimal.
Example
1,"HM,N0123456789012345"
p
Defines the following batch data for the QR Code: The error
correction level is H, which provides very high reliability. Leave
the mask number blank. The data input mode is Manual. The
type of characters are Numeric and the data is
0123456789012345.
Sample QR Code
{F,1,A,R,E,200,200,"QRCODE"
p
B,1,200,V,50,50,36,0,100,2,B,0
p
}
{B,1,N,1
p
1,"HM,N0123456789012345"
p
}
Structured Append Mode
QR Code offers a mode called structured append (or
concatenated) that allows you to collect data from multiple QR
Code symbols and use that data elsewhere. For example, the
components of a sub-assembly can have individual QR Codes
and the QR Code for the entire assembly contains all the data
from the individual codes. This mode also requires certain
parameters at the beginning of all batch data.
Syntax
"mode_id code# #of_div parity, error_cor
mask# data_input char"
mode_id Use D to indicate the structured append (or concatenated)
mode.
code# Code number of the individual symbol in the concatenated set.
You must use a two-digit number in decimal.
#of_div Total number of symbols in this concatenated set. You must
use a two-digit number in decimal.
parity Parity byte. You must use a two-digit number in hexadecimal.
There is no standard parity byte.
Printing
6-7
