Positioning the Graphic Image
This section explains how to position the graphic image within a
graphic packet header, a field of a graphic packet, or within a
format.
Within the Graphic Packet Header
When you are using RAM, the row and column parameters in the
graphic header are usually 0,0, because placement is controlled
by the graphic field in your format. This is especially true when
designing a compliance label overlay.
When you are using temporary storage, these parameters control
the placement of the graphic image on the supply.
The area enclosed within the dotted lines
represents the graphic image starting at
0,0 (as defined in the graphic header).
If you want a fixed amount of white space
around your graphic image, use
something other than 0 for row and/or
column.
The area enclosed within the dotted lines
represents the graphic image starting at
0,0 with a fixed amount of white space
(10,10) around the graphic image.
5-10
Creating Graphics
