Your printer is now in data dump mode.
4.
Download the data stream you wish to "dump" (print out on a
label).
5.
The data stream prints out automatically when there is
enough data to fill a label. Press the FEED button to print
any remaining data on another label.
,"06/11/94" p }0 10
DAD
1111" p o2,"G111111" p 03,"Smith" p 04, "12345678" p 05
3,"CHECKER ID: " p }0{B,1,N,1 p 01,"G111111
DD
200,100,0,1,2,1,B,L,0,3 p OC,330,20,0,1,1,1,B,L,0,
D
0,100,0,1,1,1,B,L,0,3,"DATE RECEIVED:" p OT,5,8,V,
D
"VIN #:" p OT,4,17,V,260,130,0,1,2,B,L,0,3 p OC,33
DD
,160,0,1,2,1,B,L,0,3 p OC,330,130,0,1,1,1,B,L,0,3,
D
C,330,160,0,1,1,1,B,L,0,3,"OWNER:" p OT,3,15,F,260
D
,3,3,2,B,L,0,3 p 08,2,9,V,330,220,4,11,080,8,L,3 p 0
DD
{F,1,A,R,E,400,400,"WINDSHIE" p OT,1,9,V,310,340,0
D
Download another data stream to dump or press the FEED button
to exit data dump mode.
Resetting Printers
Sometimes the printer receives mixed signals and loses its ability
to communicate. If this happens, reset the printer and attempt
communication again. To reset the printer, turn off the printer,
wait 15 seconds, and turn it back on.
When you turn off the printer, all the information set through the
online configuration packets (A-F) is saved. See the sections in
Chapter 2, "Configuring the Printer," for more information about
each packet.
If You Receive an Error Message
Any time you receive a message that is not described in this
manual, or the recommended action does not solve the problem,
call Technical Support.
Troubleshooting
8-3
