574 No CD scheme or room for CD. The CD scheme in the
batch does not fit the format or the field contains
blanks.
575 The graphic included in your format could not be found.
611 Font, bar code or density is invalid. The font, bar code
or density in the batch does not fit the format.
612 The data in this line of the batch is either missing or
does not match the format.
613 Reference point off tag.
614 Portion of field off tag. There may be an invalid
character in the packet. Make sure you did not enter O
for Ø.
616 Dot shifting failed. A bad dot falls on a bar code that
cannot be shifted. Call Technical Support.
618 Magnification must be 1 - 7.
621 An error occurred opening the TrueType font file. Select
a different font to download. If the error message
persists, call Technical Support.
622 Not enough memory to create the downloaded TrueType
characters in the scalable (vector) fonts buffer.
Machine Faults
These errors occur when there is a problem with the printer.
703 The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the
specified number of inches or is out of supplies. Check
the supply tracking, supply marks, black mark sensor
position, and supply roll for binding.
Troubleshooting
8-15
