C5. font Style of font. Options:
1
Standard
10
CG Triumvirate Bold
2
Reduced
11
CG Triumvirate
3
Bold
15
7 pt. CG Triumvirate
4
OCRA-like
16
9 pt. CG Triumvirate
5
HR1
17
11 pt. CG Triumvirate
6
HR2
18
15 pt. CG Triumvirate
Fonts 5 and 6 are for numeric data only.
Fonts 15 through 18 are only for 300 dpi
.
C6. hgt mag Height magnifier,
1
-
7
(times).
C7. wid mag Width magnifier,
1
-
7
(times) Proportionally spaced fonts do
not have a set width. To estimate the size of your field, use
the letter "W" for the widest field or an "L" for an average
width field.
C8. color Options for standard printer fonts:
B
Opaque, Normal, Black, Normal
D/R/W
Opaque, Normal, White, Normal
O
Transparent, Normal, Black, Normal
There are two types of field color overlay attributes:
Transparent The overlay field (text or constant text) does
not block out (or "erase") existing fields.
Opaque The overlay field blocks out (or "erases")
existing fields.
Field placement in the packet is an important consideration
when using field color attributes. If a line field is defined
before the overlay (text or constant text) field, the line field is
blocked out by the overlay field, depending on the overlay
field’s color attribute. If a line field is defined after the overlay
field, the line field is not blocked out by the overlay field,
regardless of the overlay field’s color attribute.
C9. alignment Alignment of constant text in the field. Options:
L
Align on left side of field.
C
Center text within field (for monospaced fonts only)
R
Align on right side of field (for monospaced fonts only)
B
Align at midpoint of field
E
Align at end of field.
Use
L
,
B
, or
E
for any font.
Defining Fields
3-17
