Filter
Top Products
3-6 CHAPTER 3: CABLING SWITCH 3900 PORTS
To cable the Console port:
1 Attach the female DB-9 cable connector to the
Console port’s male connector and tighten the
retaining screws.
2 Attach the other end of the DB-9 cable to your
terminal.
Figure 3-3 shows the cabling of the Console port.
You can also access the system remotely through any
Ethernet port using telnet. See the SuperStack II
Switch 3900 and 9300 Administration Guide.
To use the Administration Console to configure the
system for management access through the Console
port, see Chapter 5.
Figure 3-3 Cabling the Console Port
DB-9 connector
1000 Base SX
Pckt
Stat
Console
Serial cable