Filter
Top Products
2
INSTALLING THE
ETHERNET POWER SOURCE
AND END DEVICES
This chapter contains the information that you need to install and set up
the Ethernet Power Source (EPS) and end devices. The following topics
are described:
■ Choosing a Suitable Site
■ Rack-mounting the EPS
■ Power-up Sequence
■ Selecting the Correct Cables
■ Power Splitter Cable
■ Connecting an NBX Business Telephone
■ Connecting a 3Com Wireless Access Point
WARNING: Safety Information. Before you install or remove any
components from the Power Source unit or carry out any maintenance
procedures, you must read the safety information provided in Appendix A
of this guide.
AVERTISSEMENT: Consignes de sécurité. Avant d'installer ou d'enlever
tout composant du Power Source unit ou d'entamer une procédure de
maintenance, lisez les informations relatives à la sécurité qui se trouvent
dans l'Appendice A de ce guide.
WARNHINWEIS: Sicherheitsinformationen. Bevor Sie Komponenten
aus dem Power Source unit entfernen oder dem Power Source unit
hinzufuegen oder Instandhaltungsarbeiten verrichten, lesen Sie die
Sicherheitsanweisungen, die in Appendix A (Anhang A) in diesem
Handbuch aufgefuehrt sind.