17
ESTABLISHING WIRELESS ASSOCIATION
After the bridge and software utilities are installed, you can configure the bridge
as follows:
■ Launch the bridge configuration. (See “Configuring the Building-to-Building
Bridge” on page 18 for details on how to launch the configuration and
make changes.)
■ For a point-to-point association between two bridges, see “Setting up an Ad
Hoc Network” on page 28 and “Optimizing an Ad Hoc Installation” on
page 29.
■ For a point-to-multipoint association between an access point and one or
more bridges, see “Setting up an Access Point Infrastructure Network” on
page 30.