Filter
Top Products
40
DISCONNECTING THE BRIDGE
■ If you are using the 3Com power supply, unplug it from the power source.
Then unplug the Ethernet cable from the power supply and the second
Ethernet cable from the bridge.
■ If the bridge is connected directly to a power-over-Ethernet device, unplug the
bridge Ethernet cable from the device.
■ DO NOT ATTEMPT TO DISCONNECT under extreme weather conditions,
especially during electrical storms.
UNINSTALLING SOFTWARE AND DOCUMENTATION
If you want to uninstall the 3Com 11 Mbps Wireless LAN software and
documentation, you can either use the standard operating system procedure for
removing programs or use the following shortcut procedure:
1 From the Windows Start menu, select Start/Programs/3Com Wireless/Wireless
Building-to-Building Bridge/Uninstall.
2 When prompted to confirm, click OK.
UPGRADING BRIDGE FIRMWARE
Firmware is the software that is installed on the bridge at the factory. Some
problems can be solved by installing a new version of the firmware (upgrading
firmware).
For details on how to download a firmware update from the 3Com customer
support Web site and install it on your bridge, see “Upgrading the System” on
page 34.
CAUTION: Disconnecting the bridge ends the network association. To avoid
possible data loss, exit all networking applications on connected devices before
you disconnect the bridge.