Filter
Top Products
LAN Settings 49
The LAN Settings screen is used to specify the LAN IP address of your
Router, and to configure the DHCP server.
1 Select Unit Configuration and then specify the Router IP Address and
Subnet Mask in the LAN Settings section. The default IP address of the
Router is 192.168.1.1.
2 If you want to use the Router as a DHCP Server, check the Enable check
box.
3 Clicking Auto Range will automatically choose the largest available range
of addresses for your network. Alternatively, you can change the address
range by changing the last digit(s) of the IP Pool Start Address, or the IP
Pool End Address, or both.
4 If you use 3Com NBX telephones, enter the IP address of the NBX call
processor at 3Com NBX Call Processor.
5 Check all of your settings, and then click Apply.
The DHCP server will give out addresses to both wired and wireless
clients.
Static DHCP
Assignment
Figure 33 Static DHCP Assignment Screen
Click on the DHCP Client Tab to display a list of all the DHCP clients in
your network.
DHCP Clients List