Filter
Top Products
62 CHAPTER 5: ROUTER CONFIGURATION
Static IP Address
Connection Parameters Screen - Static IP
To setup the Router for use with a Static IP address connection:
1 Select Static IP Address (to be specified manually) in the IP Allocation
Mode field.
2 Enter your IP Address in the IP Address text box.
This information, along with the rest of the information in this screen,
should be provided to you by your ISP. If the information is already
entered, your ISP has pre-configured your Router, and you should go to
step 7
.
3 Enter your subnet mask in the Subnet Mask text box.
4 Enter your ISP Router address in the ISP Gateway Address text box.
5 Enter your primary DNS address in the Primary DNS Address text box.
6 Enter your secondary DNS address in the Secondary DNS Address text
box.
This step is optional. Not all ISPs require a secondary DNS address.
7 Check all of your settings, and then click Save.