Filter
Top Products
LAN Settings 67
Heart Beat Signal
Check with your ISP to make sure they support Heart Beat Signal.
To set up the Router for use with a Heart Beat Signal connection, use the
following procedure:
1 Select Heart Beat Signal (For Australia only) in the IP Allocation Mode
field.
2 Enter the Host Name(optional).
Some ISPs require a host name. If your ISP has this requirement, enter the
host name in the Host Name text box.
3 Enter your Heart Beat Signal user name in the Heart Beat Signal User
Name text box.
4 Enter your Heart Beat Signal password in the Heart Beat Signal Password
text box.
5 Enter the MTU value supplied by your ISP. If you do not know this, leave it
at the default value. The default is 1440.
6 Select an idle time from the Maximum Idle Time drop-down list.
This value will correspond to the amount of idle time(no Internet activity)!
that will pass before the Router automatically ends your PPTP session.
Check all of your settings, and then click Save.