3Com WL-537S Network Router User Manual


 
104 CHAPTER 6: TROUBLESHOOTING
Connections tab and click on the LAN Settings button at the bottom.
Make sure that the Proxy Server option is unchecked.
If you cannot browse to the Router, use the winipcfg utility in
Windows 95/98/ME to verify that your computer has received the
correct address information from the Router. From the Start menu,
choose Run and then enter winipcfg. Check that the computer has
an IP address of the form 192.168.1.xxx (where xxx is in the range
2-254), the subnet mask is 255.255.255.0, and the default Router is
192.168.1.1 (the address of the Router). If these are not correct, use
the Release and Renew functions to obtain a new IP address from the
Router. Under Windows 2000, use the ipconfig command-line utility
to perform the same functions.
If you still cannot browse to the Router, then use the Discovery
program on the accompanying CD-ROM as described in Appendix A
.
Connecting to the
Internet
If you can browse to the Router configuration screens but cannot access
sites on the Internet, check the following:
Confirm that the physical connection between the Router and the
cable/DSL modem is OK, and that the link status LEDs on both Router
and modem are illuminated.
Confirm that the connection between the modem and the cable/DSL
interface is OK.
Ensure that you have entered the correct information into the Router
configuration screens as required by your Internet Service Provider. Use
the “Internet Settings” screen to verify this.
For DSL users, check that the PPPoE or PPTP user name, password and
service name are correct, if these are required. Only enter a PPPoE
service name if your ISP requires one.
For cable users, check whether your ISP requires a fixed MAC
(Ethernet) address. If so, use the Clone MAC Address feature in the
Router to ensure that the correct MAC address is presented.
For cable users, check whether your ISP requires a fixed Host Name. If
so, enter the required Host Name in the Internet Settings screen.
Ensure that your computers are not configured to use a Web proxy.
On Windows computers, this can be found under Control Panel >
Internet Options > Connections.