Filter
Top Products
LAN Settings 65
3 Enter your PPP over Ethernet user name in the PPPoE User Name text box.
4 Enter a password in the PPPoE Password text box.
5 Enter your PPP over Ethernet service name in the PPPoE Service Name text
box. Not all ISPs require a PPPoE service name. Only enter a service name
if your ISP requires this.
6 Enter the MTU value supplied by your ISP. If you do not know this, leave it
at the default value. The default is 1454.
7 Select an idle time from the Maximum Idle Time drop-down list.
This value will correspond to the amount of idle time (no Internet activity)
that will pass before the Router automatically ends your PPP over
Ethernet session.
Since the Router contains its own PPPoE client, you no longer need to run
PPPoE client software on your computer to access the Internet.
PPTP
PPTP Setup Screen