Filter
Top Products
38
C
HAPTER
3: A
CCESSING
THE
S
WITCH
create vlan <name>
Creates a VLAN.
config account <username> {encrypted}
{<password>}
Configures a user account password.
Passwords must have a minimum of four
characters and can have a maximum of 12
characters. User names and passwords are
case-sensitive.
config banner
Configures the banner string. You can enter
up to 24 rows of 80-column text that is
displayed before the login prompt of each
session. Press [Return] at the beginning of a
line to terminate the command and apply the
banner. To clear the banner, press [Return] at
the beginning of the first line.
config time <date> <time>
Configures the system date and time. The
format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. You
cannot set the year past 2023.
config timezone <gmt_offset> {autodst |
noautodst}
Configures the time zone information to the
configured offset from GMT time. The format
of
gmt_offset
is +/- minutes from GMT
time. Specify:
■
autodst
— Enables automatic Daylight
Savings Time change.
■
nosautodst
— Disables automatic
Daylight Savings Time change.
The default setting is
autodst
.
config vlan <name> ipaddress
<ip_address> {<mask>}
Configures an IP address and subnet mask
for a VLAN.
disable autodst
Disables automatic Daylight Savings Time
change.
enable autodst
Enables automatic Daylight Savings Time
change.
enable bootp vlan [<name> | all]
Enables BOOTP for one or more VLANs.
enable cli-config-logging
Enables logging CLI configuration commands
to the syslog for auditing purposes.
enable clipaging
Enables pausing at the end of each CLI
screen, allowing you to use a scripting
language to get switch status.
(continued)
Table 9
Common Commands (continued)
Command Description