3Com LINKBUILDER MSH 4 PORT ETHERNET BRIDGE MODULE Network Hardware User Manual


 
DUA1860-0AAA01
Custom Filter Configuration 3-13
Setting Up A Host-to-Port Filter Set
Select HOST-TO-PORT from the Bridge Filters menu.
The Host-to-Port screen appears, as shown in Figure 3-4
. You use
this screen for setting up a port's host-to-port filter set. The
screen displays the hosts included in the filter set of the port
denoted in the PORT NAME field. Simply alter this field to work
on a different filter set. There are four host-to-port filter sets, one
for each port.
Enter all hosts that belong to the set.
For host-to-port filtering information, refer to
Filter Sets
on page
1-23.
Figure 3-4
Host-to-Port
Port Name:
Text Field. Enter the name of the port who's filter set
you want to set up. Use
1
,
2
,
3
or
E
. Press [Return] to accept the
port name.
Set Name:
Text Field. This is optional. Enter a name for the filter
set. The set name helps you identify the set. For example, you
may want to name a set
finance
.