DUA1860-0AAA01
Correcting Problems 6-7
SNMP Problems
Symptom: Cannot establish communication via SNMP.
Action:
■
Check that you have an IP address entered. If you cannot PING or
Telnet the bridge, check the IP address and default gateway
address.
■
Check that SNMP is properly configured.
■
If you have not reset the bridge since enabling SNMP, do so.
Operation Problems
Symptom: The bridge does not respond to the keyboard, or
freezes in operation.
Action:
■
Press [Ctrl] + [P] to return to the management module, and reset
the MSH chassis slot that the bridge is in (slot reset).
■
Remove and install the bridge into the LinkBuilder MSH chassis.